|
|
LO-LIFT FRAME
MANUAL LONGITUDINAL LEVELING BOTTOM 20/40 FT. ISO TYPE 1
CONTAINER SLING (AE24000B)
|
|
If you are finding that our Low Profile Bottom Lift Slings are just not low enough, the AE24000B series may be the solution. This series offers a headroom as low as a scant 21 inches above the container (assuming the container is 102" tall) while still maintaining the minimum allowable sling angle of 30 degrees when lifting from the bottom corners (Ref ISO 3874 and ISO 1496). This design is made to lift either a 20' or 40' container. The 40' container is lifted using the same assembly as a 20 footer except that wire rope
extension pendants are used and are included with the product. Several models are available with capacities (working load limit or WLL) ranging from 40,000 lbs to 67,200 lbs. As an added feature, the frame offers several lift points, enabling the level lift of unequally loaded containers
(longitudinal direction only). However, please note that ISO 1496 tests assume a relatively evenly loaded container. It is the user's responsibility to confirm the suitability of a container's lift capabilities.
For 40,000 capacity, see our
AE24000A-1PA. |
|
• |
WORK LOAD LIMIT (WLL):
From 24 Tons (48,000 LB) to 33.6 Tons (67,200 LB) (See chart
below) |
|
• |
PROOF TESTED to 125% |
|
• |
CALCULATED WEIGHT:
(See Chart Below) Weight of frame only: 2,290 LB |
|
• |
FINISH: Sandblast, Primed and
Paint Yellow |
|
• |
Standard specification #EAD21000A Applies |
|
• |
Note 1: Standard TANDEMLOC
specification EAD21000A Applies |
|
• |
Note 2: Sling is for lifting 20 Ft. or
40 Ft. ISO Type 1 containers up to 8'-6" high and
conforms to ISO 3874 handling and securing. |
|
|
| - |
For lifting 20 Footers, use the
132" pendant which includes a shackle at the top
and a rotary lift lug at the bottom. |
| - |
For lifting a 40 Footer, add
four 90" long extension pendants (which includes a
shackle for the lift frame) to extend the 132" pendants
to 222" |
|
|
• |
Note 3: A 12.00"
minimum space is required for slack to attach in bottom
corner fitting side holes. (See drawing below) |
|
• |
Note 4: Manufacturing
tolerances apply |
|
|
This lifter may be customized to meet your application: inquire for other load capacities or
sizes. Photo shown may be of a similar item.
|
 |
| For custom configurations, pricing, design and delivery schedules - any questions at all. |
|
|
| Product Photo
|
|
|
Download / view printer friendly data sheet(s)
Login / register to activate:
TANDEMLOC_AE24000B.pdf
Type: Adobe Acrobat Document
Size: 222 KB
|
Need Credit? Let us know.
(Note: Credit Applications will only be processed with an accompanying
purchase order.) |
|
Depiction with 20 Ft. Container
|
|
|
Ordering / Reference Nos.
|
Part No.
Click to request quote |
Total Weight
(Liftframe & Sling) |
Work Load Limit
(WLL) |
| AE24000B-2PA |
2,690 LB |
48,000 LB |
| AE24000B-3PA |
2,715 LB |
53,000 LB |
| AE24000B-4PA |
2,885 LB |
67,200 LB |
** A longer pendant is required for containers over
102" tall |
 |
|
 |
 |
Drawing for
the AE24001A-1PA
 |
Safety Labeling
|
|
|
Safety Labeling - Click to open
enlarged view |
|
 |
|
Read Important Safety Information:
Click here
|
|
|
|
CAREER OPPORTUNITY AT
TANDEMLOC: Mechanical Engineer,
preferably with experience in the design of below the hook lifting
devices. Please send resumes to Tandemloc, 824 Highway 101, Havelock,
NC 28532, attention Sandy Allen or sandy@tandemloc.com.